Chemtex Speciality Limited is one of the leading international ISO 9001:2008 certified companies dedicated to provide its clients with leading edge technology in RO membrane pretreatment chemicals to treat RO feed water from scaling, corrosion, organic foulants like bacteria, fungi, algae etc.
Chemtex’s R&D Team is continuously involved to meet the ever changing requirements of the RO membrane water treatment industry. As a result, Chemtex has repeatedly produced and is still producing superior quality and very effective RO pretreatment chemicals to run your RO systems smoothly and to enhance the system life.
Coming to fresh water and wastewater clarification, products that utilize a single type of coagulant chemistry typically do not provide exceptional results. Unlike single-component products, Chemtex’s RO Coagulants (Cationic Polyelectrolyte) comprise a family of products that typically utilize two or more chemistries to specifically improve the clarification of fresh water and wastewater over a wide range of conditions.
Coagulants from Chemtex can increase pre-filtration efficiency and productivity in membrane systems for RO feed water.
- Improve liquids/solids separation
- Are compatible with all RO and thin-film composite membranes
- Assure consistent SDI feed water specifications set by membrane manufacturers
- Increase resistance to filter breakthrough compared to metal coagulants
- Provide better color removal than organic polymers
- Are effective over a broad pH range
- Minimize flushing time and backwash waste
- Reduce treatment costs
It is a highly effective quaternary polymer compound which is used for color removal in textile, paper and dyeing industries and light color liquid from other industries.
Equivalent or even better than MAXFLOC T, MAXFLOC 20, MAXFLOC 30, MAXFLOC 502, MAXFLOC 504, MAXFLOC 506, MAXFLOC 507, MAXFLOC C-11, MAXFLOC C-21, MAXFLOC C-22, MAXFLOC C-31 and MAXFLOC C-33 from THERMAX; PERMAFLOC PC 306, PERMAFLOC PC 306 T and PERMAFLOC PC 603 T from NALCO; CHARGEPAC and AMERFLOC range of products from CHEMBOND ASHLAND; SOILSEP range of products from GE WATER etc.
- Form & Appearance: Powder/Liquid
- Viscosity: Product Specific (mPa.s)
- Specific Gravity: Product Specific
- pH: Product Specific (pH)
- Solid Content: Product Specific (in %)
- Charge: Cationic
- Solubility in Water: 100%
Application: – Water Treatment, Waste water treatment, effluent water treatment, RO water pre-treatment, Wastewater
Dosage and Method: – Chemtex’s RO Coagulants (Cationic Polyelectrolyte) are dosed during water pretreatment for solid/liquid separation before the water gets introduced to softner/reverse osmosis system. Coagulating chemical is diluting it with 10 – 40 times with water and then dosed into the waste water directly, after being mixed several minutes, waste is precipitated or air – floated and the water becomes clear.
It is dosed exactly as per the dosage rate and method of MAXFLOC T, MAXFLOC 20, MAXFLOC 30, MAXFLOC 502, MAXFLOC 504, MAXFLOC 506, MAXFLOC 507, MAXFLOC C-11, MAXFLOC C-21, MAXFLOC C-22, MAXFLOC C-31 and MAXFLOC C-33 from THERMAX; PERMAFLOC PC 306, PERMAFLOC PC 306 T and PERMAFLOC PC 603 T from NALCO; CHARGEPAC and AMERFLOC range of products from CHEMBOND ASHLAND; SOILSEP range of products from GE WATER etc.